Step 1
For the begining use some picture with a lot of color contrast.
Note: Man on the picture must be Layer.
Step 2
With Clone Stamp Tool remove parts of the picture who may be to much for texture. In this case we remove hair and underwear.
Step 3
Select only Layer of the picture.
Step 4
Change Color Mode to Grayscale. If ask you to flatten image press Dont Flatten.
Step 5
Ok. Now go to Filter>Texture>Craquelure. Do like in picture.
Step 6
This is effect what you must get.
Step 7
Now take some picture of Stone. We are chose something like this.
Put the Stone picture in front of First Layer (Man).
Step 8
Select First Layer then use Inverse Shift+Ctrl+D.
Then again select Stone Layer and press Delete.
Step 9
Select Multiply like in picture.
Step 10
Now take picture of Marble. This will be Layer number Three.
Step 11
Do same like on Step 8 with Stone Layer.
Step 12
Use Pin Light like in picture below.
Step 13
Now go back to Color Mode and select RGB Color.
Step 14
Take some picture for background. We chose picture of dark sky.
Step 15
Put picture behind of all layers.
Step 16
And here is our Stone Man.
